Why choose Hawke Transit System?

  • Increased safety

  • Total inspectability

  • Flexibility

  • Speed of assembly

  • Cost effective

  • High quality product

  • Certified system by worldwide class societies

 
 
Safety First.png

Safety First

At Hawke, safety comes first.

The Hawke Transit System is the only totally inspectable system on the market.

Our Tolerant Blocks use a colour coding system to minimize incorrect installation. This feature is unique to Hawke Transit System.

Also, the min and max cable O/D is clearly marked on the block as to which that particular block will seal. Both features enable post inspections of installed transits, increasing the safety and reliability of the installations.

 
Tolerant Block 1.jpg

Tolerant blocks

This tolerant block enables a wide range of cable or pipe diameters to be accommodated by a compact range of tolerant blocks sizes. Hawke tolerant blocks have 5 sealing faces that are displaced by the sealing process.

This results in a tolerance of up to 4 mm for cable diameters, without any onsite modifications.

his acceptance range is sufficient to accommodate deviations found in cable tolerances.

Hawke cable/pipe tolerant blocks have been designed with a degree of flexibility in order to accommodate variances in cable diameters. Additionally this flexibility enables each Hawke block size to accept a range of cable or pipe diameters.

Thanks to this tolerance, each Hawke tolerant block seals a range of diameters between 3 and 4 mm.

Available in seven block sizes accommodating service diameters from 3mm to 100mm.

Hawke blocks are marked with minimum and maximum cable diameters. E.g. block size 3018 is marked with sizes 18 / 21 to signify that it will accept cable diameters from 18 mm up to maximum of 21 mm.

 
Colourcode-852x1024.jpg

COLOUR CODING

Hawke Transit System with just one look

Under certain site conditions, the general environment and lighting may make it difficult to select the correct blocks.

After installation the colour coding allows the inspector to clearly identify that the blocks have been correctly sized for the cable.

Without colour coding it is impossible to inspect that the system has been installed correctly.

Each individual block has a colour coded face, this ensures that each size and pair of tolerant block halves is always correctly matched to the cable diameter.